194
Appendix
Table 203: Parameterization SF, ASi – Attribute "Diagnosis: Bus fault"
Attribute Name
Diagnosis: Bus fault
Table 204: Parameterization SF, SSI 630 – Attribute "Baud rate [kHz]"
Attribute Name
Baud rate [kHz]
Table 205: Parameterization SF, SSI 630 – Attribute "SSI frame"
Attribute Name
SSI frame
Table 206: Parameterization SF, SSI 630 – Attribute "SSI clocks"
Attribute Name
SSI clocks
Table 207: Parameterization SF, SSI 630 – Attribute "Relevant data length [bit]"
Attribute Name
Relevant data length
[bit]
Table 208: Parameterization SF, SSI 630 – Attribute Synchronous operation
Attribute Name
Synchronous
operation
Table 209: Parameterization SF, SSI 630 – Attribute "Gray-Dual code conversion"
Attribute Name
Gray-Dual code
conversion
750-375 PROFINET IO advanced Fieldbus Coupler
Attribute Value
Description
A bus fault does not lead to transmission of a
0 (false)
diagnostic alarm nor entry in the diagnostics
database of the station proxy.
Provided that the channel diagnostics has been
activated, a bus fault leads to transmission of a
1 (true)
diagnostic alarm and entry in the diagnostics
database of the station proxy.
Attribute Value
Description
1000.0
250.0
125.0
See manual for I/O module 75x-630
100.0
www.wago.com
83.0
71.0
62.5
Attribute Value
Description
32 Bit
See manual for I/O module 75x-630
acc. to SSI clocks
www.wago.com
(125 kHz only)
Attribute Value
Description
See manual for I/O module 75x-630
1 ... 32
www.wago.com
Attribute Value
Description
See manual for I/O module 75x-630
0 ... 24 ... 32
www.wago.com
Attribute Value
Description
0 (false)
See manual for I/O module 75x-630
www.wago.com
1 (true)
Attribute Value
Description
0 (false)
See manual for I/O module 75x-630
www.wago.com
1 (true)
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0