Mounting; Installation Position; Total Extension - WAGO -I/O-SYSTEM 750 Manual

60

Mounting

Pos : 56 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Monti eren - D emontieren/M ontier en - Übersc hrift 1 @ 3\mod_1225446744750_21.doc x @ 24900 @ 1 @ 1
5 Mounting
Pos : 57.1 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Einbaul age @ 3\mod_1225446818312_21.doc x @ 24903 @ 2 @ 1
5.1

Installation Position

Along with horizontal and vertical installation, all other installation positions are
allowed.
Use an end stop in the case of vertical mounting!
In the case of vertical assembly, an end stop has to be mounted as an additional
safeguard against slipping.
WAGO order no. 249-116
WAGO order no. 249-117
Pos : 57.2 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Gesamtaus bau @ 3\mod_1231764099468_21.doc x @ 25940 @ 2 @ 1
5.2

Total Extension

The length of the module assembly (including one end module of 12mm width)
that can be connected to the 750-375 is 780 mm. When assembled, the I/O
modules have a maximum length of 768 mm.
Examples:
•
64 I/O modules of 12 mm width can be connected to one coupler/controller.
•
32 I/O modules of 24 mm width can be connected to one coupler/controller.
Exception:
The number of connected I/O modules also depends on which type of
coupler/controller is used. For example, the maximum number of I/O modules
that can be connected to a PROFIBUS coupler/controller is 63 without end
module.
Observe maximum total length of a node!
The maximum total length of a node without a coupler/controller must not exceed
780 mm. Furthermore, you must observe restrictions made on certain types of
couplers/controllers.
750-375 PROFINET IO advanced Fieldbus Coupler
End stop for DIN 35 rail, 6 mm wide
End stop for DIN 35 rail, 10 mm wide
WAGO-I/O-SYSTEM 750
Manual
Version 1.1.0