I/O-Link Master (From Fw 03); Can Gateway (From Fw 03); Proportional Valve Module (From Fw 03); Table 110: Submodule Types And Data Lengths - Stepper Modules - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-375 PROFINET IO advanced Fieldbus Coupler
Table 110: Submodule types and data lengths – Stepper Modules
PNIO module type
PNIO submodule type
Stepper, Servo
{UINT8, UINT8,
UINT8[10]}I/O

14.1.6.14 I/O-Link Master (from FW 03)

Starting from FW 03, the I/O-Link Master modules 75x-675 are supported.
Additional information about process data of I/O module!
For a detailed description of the process data of this module, please read in the
manual for this I/O module under:
www.wago.com

14.1.6.15 CAN Gateway (from FW 03)

Starting from FW 03, the CAN Gateway modules 75x-678 are supported.
Additional information about process data of I/O module!
For a detailed description of the process data of this module, please read in the
manual for this I/O module under:
www.wago.com

14.1.6.16 Proportional Valve Module (from FW 03)

Starting from FW 03, the Prportional Valve Modules 75x-632 are supported.
Additional information about process data of I/O module!
For a detailed description of the process data of this module, please read in the
manual for this I/O module under:
www.wago.com
Manual
Version 1.1.0
Process data length [byte]/
allocation [bit]
Data type Input (I-PI) Output (O-PI)
{Unsigned8[2],
Unsigned8[7]} 12
Unsigned8[3]}
Appendix
Telegram
allocation [byte]
Input Output
12 14
171
14