Kemper EVOLUTION LINE Operating Manual page 93

Description of the line
Moreover, the following can be changed by touching the other input boxes:
C
ONTROL MOULD
TRANSPORT
S
TART MOULD
TRANSPORT
Finally, the buttons for operation, saving and navigation:
S button
TART
S button
TOP
B
ELT POSITION
The following menu appears after pressing the optional B
Emil Kemper GmbH
Selection of 'On' or 'Off''. Monitoring of the extending table can be
switched on or off. Reciprocation only occurs when the wooden
board/baking tray has been released.
Use the Start' button to manually release mould transport. Release
is issued automatically after each stroke.
Start the line
Stop the line
S button to save inputs. Password level 7 is required for saving.
AVE
U button to return to the first page of the 'Reciprocating belt menu'
P
B button to return to the 'Reciprocating belt menu'
ACK
B button to return to the start screen
ACK
button (optional)
10:59:59
00000 pcs/h
'Reciprocating belt menu'
Release
Belt position
Stop
Start
EVOLUTION LINE roll machine
ELT POSITION
Head machine
Off
button:
Line 000
000
85