Kemper EVOLUTION LINE Operating Manual page 139

Operation

In the 'Reciprocating belt menu', press the P
of the reciprocating belt.
The following menu appears after pressing the P
1
2
3
4
5
6
7
Under 'Reciprocating belt menu' you can change the setting of the reciprocating belt:

Touch the S
millimeters from the photoelectric sensor to the required position of the first row of
dough pieces on the first baking tray.

Touch the P
reciprocating belt pulls off.

Touch the input box S
tray in millimetres (in transport direction).
Emil Kemper GmbH
10:59:59
00000 pcs/h
'Reciprocating belt menu'
Start reciprocating belt
Pull-off length
Tray size
Number of moulds
Rows (longitudinal)
Step correction
Correction placement
Stop
Start
Note!
After touching the input boxes, a keypad appears for entering numbers.
Confirm your entry via the keypad.
TART OF RECIPROCATING BELT
- input box (2) and enter the distance in millimeters that the
ULL OFF LENGTH
IZE OF MOULD
EVOLUTION LINE roll machine
button to change the settings
ARAMETER
button:
ARAMETER
Head machine
Step length [mm]:
mm
mm
mm
pc
pc
Ip
mm/pc
input box (1) and enter the distance in
(3), and enter the size of the wooden board/baking
Line 000
000
8
131