Limit Switches - Kemper EVOLUTION LINE Operating Manual

7.7.2 Limit switches

If an access door is opened while the line is running, the respective limit switch
immediately stops the line.
After waiting 20 seconds, the following steps must be carried out to put the line back into
operation:

Close the open access door.

Press the C

Press the S
144
Hazard!
The line's limit switches must not be bypassed.
This poses a hazard through moving parts in the line.
button on the touch panel.
ONTROL VOLTAGE
button on the touch panel.
TART
EVOLUTION LINE roll machine
Operation
Emil Kemper GmbH