Every 700 Operating Hours Or Every Three Months; Inspection Every 1400 Operating Hours Or Every Half-Year; Cleaning And Maintenance Tasks; Preparations - Kemper EVOLUTION LINE Operating Manual

8.2.4 Every 700 operating hours or every three months

8.2.5 Inspection every 1400 operating hours or every half-year

Have the entire line inspected by Kemper Service every 1400 hours.

8.3 Cleaning and maintenance tasks

Configuration of the assemblies and line modules in the line is displayed in chapter
"5 Overview of the line ".

8.3.1 Preparations


Switch the line off (see section "7.1 Switching the line on and off").

Prevent the line from being accidentally reconnected by disconnecting the mains plug
or locking the main switch.
152
Note!
To ensure perfect sterilisation of the proofing racks, the TUV lamps in the
intermediate proofer must be replaced after one year at the latest (on the
basis of ten hours of operation a day).
Hazard!
Always disconnect the power supply before carrying out any cleaning and
maintenance work at the line.
EVOLUTION LINE roll machine
Cleaning and maintenance
Emil Kemper GmbH