Inspecting And Replacing The Triangular Knife - Kemper EVOLUTION LINE Operating Manual

8.3.8.2 Inspecting and replacing the triangular knife


Carry out the preparations (see section "8.3.1 Preparations").

Inspect the triangular knife for damage. Replace it if applicable.

Fit the triangular knife in reverse order.
164
Cutting hazard
Pay attention to the triangular knife during maintenance work. There is the
risk of hand injuries.
Note!
Check the cutting position after replacing the triangular knife. Adjust the
cutting position if applicable.
EVOLUTION LINE roll machine
Loosen the setscrew (1).
Loosen the locking screw (2).
Turn the adjusting screw (3) in the direction of
the arrow until the knife holder (4) can be
removed.
Loosen the two countersunk screws (1) to be
able to remove the triangular knife from its
holder (2).
Cleaning and maintenance
Emil Kemper GmbH