Greases; Storage Of Lubricants - Kemper EVOLUTION LINE Operating Manual

If lubricants of another quality are used or if the specified lubrication intervals are not
observed, no liability will be accepted by Emil Kemper GmbH in the event of damage.

8.4.2 Greases

Designation
Manufacturer:
Product:
Product form:
Characteristics:
Appearance:
Temperature range for use:
Base oil viscosity (+ 40 °C):
Applications:
Approvals, specifications:

8.4.3 Storage of lubricants

Lubricants such as oil and grease must be stored in clean closed containers, such as tins
or cans, so that dust and moisture cannot enter and the oxidation effect of the air is kept
to a minimum. The storage location should be dry and cool.
186
OKS 371
OKS Spezialschmierstoffe GmbH
D-80993 München
Suitable as a food-grade universal lubrication and
separating agent. Highly effective due to excellent
creep resistant and water repellent properties.
Versatile application, since it is transparent and
physiologically safe. Approved as lubricant and
separating agent for the foodstuff and drinks
industry. Complies with the regulations of DAB 10.
Registered by NSF in category H1 under number
124384.
Spray (500ml)
Transparent
- 10 °C to + 180 °C
14 mm²/s
Lubrication of valve seals, sleeves,
O-rings, drives, piston rods and guides of slides,
hinges and roller chains and mechanisms for the
entire foodstuffs, beverages and drinks industry, of
knives in the paper and cardboard industry as well
as needles and blanks of knitting machines, etc.
even under the influence of water. Removal of oily
soiling due to excellent creep characteristics.
Protect against moisture.
Food technology
OKS 371: NSF H1 reg. no. 124384 according to
DAB 10
EVOLUTION LINE roll machine
Cleaning and maintenance
Emil Kemper GmbH