Reciprocating Belt Ab60.1; Every 200 Operating Hours Or Monthly; Basic Module; Discharge Belt 1 - Kemper EVOLUTION LINE Operating Manual

8.2.2.5 Reciprocating belt AB60.1

Cleaning point
All chain drives
Maintenance point Lubricant
Belt
All chain drives
Further explanations can be found in section "8.3.16 Reciprocating belt AB60.1".

8.2.3 Every 200 operating hours or monthly

8.2.3.1 Basic module

Maintenance point Lubricant
Transfer points
Further explanations can be found in section "8.3.2 Basic module".

8.2.3.2 Discharge belt 1

Maintenance point Lubricant
Belt
Further explanations can be found in section "8.3.4 Discharge belt 1".
150
Cleaning agent Comment
Brush, clean cloth Remove residual dough and flour.
Comment
Carry out a test run with pieces of dough and
check placement.
Check the conveyor belt for damages.
Check the belt tension.
If necessary, retension the belt.
OKS 371 Check the chain tension.
If necessary, retension the chains.
Lubricate the chains.
Comment
Check the transfer points.
If necessary, readjust the transfer points.
Comment
Check the belt for damage.
If necessary, replace the belt.
EVOLUTION LINE roll machine
Cleaning and maintenance
Emil Kemper GmbH