Faults; Behaviour In Case Of Faults; Safety Shutdown - Kemper EVOLUTION LINE Operating Manual

Faults

9 Faults

9.1 Behaviour in case of faults


Switch the line off before starting to rectify any faults (see chapter "7 Operation").

Prevent the line from being switched on again by disconnecting the mains plug or
locking the main switch.

9.2 Safety shutdown

Emil Kemper GmbH
Note!
General faults are described below.
If a fault cannot be rectified or if a fault occurs that is not listed here, please
contact Customer Service.
Note!
Details of the head machine are given in the separate operating manual.
Hazard!
Irrespective of the information given below, local safety regulations apply in
all cases when it comes to rectifying faults.
Note!
We strongly recommend the installation of a lockable local switch. Such a
local switch prevents the line from being switched on unexpectedly during
cleaning, fault or repair work and allows the line to be disconnected from
the mains if necessary.
EVOLUTION LINE roll machine
189