Preparations - Kemper EVOLUTION LINE Operating Manual

3.4.1 Preparations

The customer is responsible for supplying the electric mains cable and other electrical
equipment in the building.
The electrical characteristics of the supply network must match the values shown on the
rating plates of the assemblies and line modules (see section "3.4.2 Rating plate").
16
Note!
The line can be connected to a 300 mA residual-current-operated circuit
breaker.
We recommend a residual-current-operated circuit breaker that is sensitive
to all types of current in order to avoid mistriggers.
We strongly recommend the installation of a lockable local switch. Such a
local switch prevents the line from being switched on unexpectedly during
cleaning, fault or repair work and allows the line to be disconnected from
the mains if necessary.
EVOLUTION LINE roll machine
Installation
Emil Kemper GmbH