Selecting A Recipe Via The Touch Panel - Kemper EVOLUTION LINE Operating Manual

7.5 Selecting a recipe via the touch panel

This section describes all the required working steps to create the pieces of dough with
one of your recipes. All the required settings are saved in your recipes.

Switch the line on (see section "7.1 Switching the line on and off").

Switch the control voltage on (see section "7.2 Switching the control voltage on").
After a few seconds, the start screen appears with illustrations of the line's assemblies on
the touch screen. See the following excerpt of the start screen:
1

Press the R
The 'Enable recipe menu' opens after pressing the Recipe number button (1):
140
Note!
The touch control contains recipes which have been set by Emil Kemper
GmbH according to your wishes.
000 00000000000000000000
Head
Start Stop
Machine
(1) button on the start screen.
ECIPE NUMBER
EVOLUTION LINE roll machine
Info ACK Menu
Operation
Emil Kemper GmbH