Kemper EVOLUTION LINE Operating Manual page 141

Operation
In the sub/menu 'Reciprocating belt menu', touch the input boxes to change further
settings for controlling the reciprocating belt:

Touch the input box W

Touch the input box B
belt to the basic position in Hertz.

Touch the triangle (3) in the drop-down menu.
The drop-down menu opens. You can select between three settings (Table acceptance,
Mould transport and Manual acceptance).

Touch the desired setting.
The drop-down menu closes, your selection is entered.

Press the C
When touched, the display toggles between 'On' (stroke only occurs when the wooden
board/baking tray is in the loading position) and 'Off'' (monitoring is switched off).

Press the S
Use the Start' button to manually release mould transport. Release is issued
automatically after each stroke.

Press the
Password level 7 is required for saving.

Press the
button to open the start screen.
Emil Kemper GmbH
Note!
After touching the input boxes, a keypad appears for entering numbers.
Confirm your entry via the keypad
ORKING POSITION
ASIC POSITION
HECK MOULD TRANSPORT
TART MOULD TRANSPORT
button to save your settings in the displayed recipe.
button to open the 'Reciprocating belt menu' or press the
EVOLUTION LINE roll machine
(1) and enter the reciprocating speed in Hertz.
(2) and enter the return speed of the reciprocating
(4) button
(5) button
133