Transport Information - Kemper EVOLUTION LINE Operating Manual

Packaging material
The packaging used for transport and protection of the line consists primarily of the
following materials, which are suited to recycling:
 Cardboard including corrugated
 Styrofoam, CFC-free
 Polyethylene foil (transparent)
 Pressed chipboard without phenolic resin
 Wood, untreated

2.3 Transport information

Special care must be taken when transporting this line in order to avoid damage from
extraneous elements or from careless loading and unloading.
The line may be delivered on a pallet, depending on the type and duration of transport. In
this case, there are transport restraints.
10
Note!
Do not put the packaging in the normal waste but find out from your
community's waste disposal centre where these packaging materials
should be handed in.
Note!
Please refer to the separate line documentation provided by
Emil Kemper GmbH to see more information about this section.
Attention!
To load and unload the line modules or pallets, lift them at the marked
points only.
The load capacity of the lifting equipment (e.g. forklift) must at least match
the weight of the line module with its packaging (see separate line
documentation from Emil Kemper GmbH).
When moving the pallets and line modules within the plant, fasten them to
prevent toppling (e.g. with belts).
EVOLUTION LINE roll machine
Transport and storage
Emil Kemper GmbH