Setting The Timing Adjustment; Setting A Recipe At The Cutting Station - Kemper EVOLUTION LINE Operating Manual

7.4.6.4 Setting the timing adjustment

The cut is adjusted to the timing of the belt by moving the position of the cutting station. If
the setting is right, the cut is performed when the dough pieces are at a standstill.

7.4.6.5 Setting a recipe at the cutting station

In the menu item 'Cutting station' , you can change the settings of the cutting station in
the respective assembly.
The illustration below shows an example of the menu for an assembly with the 'Cutting
station' menu item:
114
Note!
The menu item 'Cutting station' can be accessed in the main menu of the
respective assembly after pressing the P
"7.3 Setting assemblies")!
EVOLUTION LINE roll machine
Turn the adjusting wheel (1) in the direction of
the arrow (2) to move the cutting station to the
right.
Turn the adjusting wheel (1) in the direction of
the arrow (3) to move the cutting station to the
left.
ARAMETER
Operation
button (see section
Emil Kemper GmbH