Kemper EVOLUTION LINE Operating Manual page 92

It is possible to access further input boxes in the 'Reciprocating belt menu' by pressing
the
In the continuation of the 'Reciprocating belt menu', touch the input boxes in the menu
item 'Reciprocating speed' to change the control values of the reciprocating belt:
W
ORKING POSITION
B
ASIC POSITION
In the menu item 'Location', touch the drop-down menu to select the following three
settings:
T
ABLE ACCEPTANCE
M
OULD TRANSPORT
M
ANUAL HAUL
84
button. A continuation of the 'Reciprocating belt menu' appears:
10:59:59
00000 pcs/h
'Reciprocating belt menu'
Reciprocating speed
Working position
Basic position
Stop
Start
Input of the reciprocating speed between 25 and 50 Hertz.
Input of the return speed to the basic position between 15 and 30
Hertz.
Normal operation of the reciprocating belt.
Automatic mould transport with optionally available mould conveyor
belt.
- Reciprocating belt transports the pieces of dough, no reciprocating
OFF
function.
EVOLUTION LINE roll machine
Head machine
Location
Table acceptance
Hz
Hz
Control
Mould transport
Start
Mould transport
Description of the line
Line 000
000
On
Start
Emil Kemper GmbH