Tensioning And Lubricating The Drive Chain Conveyor Belt Drive - Kemper EVOLUTION LINE Operating Manual

8.3.15.3 Tensioning and lubricating the drive chain conveyor belt drive


Carry out the preparations (see section "8.3.1 Preparations").
The chain tension is retained for a period of time by a coil spring. The chain must be
retensioned after this period.

Reinsert the panel.
176
Remove the panel (1) by unscrewing the
fastening screw.
Check the correct chain tension (1).
If necessary, adjust the hexagon nut (2) at the
chain tensioner to tension the chain (1).
Lubricate the chain with the specified oil (see
section "8.4.2 Greases").
EVOLUTION LINE roll machine
Cleaning and maintenance
Emil Kemper GmbH