Setting The Alignment And Pressure Roller (Timing Roller); Setting The Height Of The Alignment And Pressure Roller; Setting A Recipe At The Alignment And Pressure Roller - Kemper EVOLUTION LINE Operating Manual

Operation

7.4.12 Setting the alignment and pressure roller (timing roller)

Configuration of the line module Alignment and pressure roller in the line is displayed in
section "5 Overview of the line".

7.4.12.1 Setting the height of the alignment and pressure roller

7.4.12.2 Setting a recipe at the alignment and pressure roller

In the menu item 'Timing roller', you can change the settings of the alignment and
pressure roller in the respective assembly.
The following illustration displays the menu excerpt of an assembly with the menu item
'Timing roller':
Timing roller
Off
Start of following
Runtime
Emil Kemper GmbH
Note!
The menu item 'Timing roller' can be accessed in the main menu of the
respective assembly after pressing the P
"7.3 Setting assemblies")!
Note!
After touching the input boxes, a keypad appears for entering numbers.
Confirm your entry via the keypad
Ip
Ip
EVOLUTION LINE roll machine
Turn the adjusting wheel (1)
anti-clockwise(2) to lower the pressure roller,
–
clockwise (3) to raise the pressure roller.
–
ARAMETER
Touch the triangle (1) in the drop-down menu
1 in the menu item 'Timing roller'.
button (see section
127