Alignment And Pressure Roller (Timing Roller); Reciprocating Belt; Reciprocating Belt Ab60.1; Every 50 Operating Hours Or Weekly - Kemper EVOLUTION LINE Operating Manual

8.2.1.8 Alignment and pressure roller (timing roller)

Cleaning point
Pressure roller
Further explanations can be found in section "8.3.14 Alignment and pressure roller".

8.2.1.9 Reciprocating belt

Cleaning point
Belt
Further explanations can be found in section "8.3.15 Reciprocating belt".

8.2.1.10 Reciprocating belt AB60.1

Cleaning point
Belt
Pneumatic
equipment
Further explanations can be found in section "8.3.16 Reciprocating belt AB60.1".

8.2.2 Every 50 operating hours or weekly

8.2.2.1 Basic module

Maintenance point Lubricant
Cup chains
Transfer point
Further explanations can be found in section "8.3.2 Basic module".
148
Cleaning agent Comment
Plastic scraper, Remove residual dough and flour.
clean cloth
Cleaning agent Comment
Plastic scraper, Remove residual dough and flour.
clean cloth
Cleaning agent Comment
Plastic scraper, Remove residual dough and flour.
clean cloth
Check the pneumatic equipment for leaks and
the correct pressure setting.
Comment
OKS 371 Check the cup chain tension. If necessary,
retension the cup chain.
Lubricate the cup chains if they cause running
noise.
Check the transfer points
EVOLUTION LINE roll machine
Cleaning and maintenance
Emil Kemper GmbH