Kemper EVOLUTION LINE Operating Manual page 132

Setting the long-moulding belt via the touch panel
The illustration below shows the menu for an assembly with the long-moulding belt as an
example:
2
Under 'Top belt option' you can change the settings of the respective long-moulding belt
in the assembly:

Touch the triangle (1) in the drop-down menu.
The drop-down menu opens. You can choose between three settings (Off, Following and
Opposite).
124
1
10:59:59
00000 pcs/h
Roll-out station menu
Top belt option
Off
Top belt
Bottom belt
Roll-1
Off
Roll-2
Off
Start Stop
EVOLUTION LINE roll machine
Press the arrow button (1) to raise the top belt
on the right-hand side.
Press the arrow button (2) to lower the top belt
on the right-hand side.
Operation
Timing roller
Off
Start of following
Hz
Runtime
Hz
Operation
Line 000
Head machine
000
Auto
Ip
Ip
Emil Kemper GmbH