Long-Moulding Belt; Cleaning The Top Belt; Tensioning The Top Belt - Kemper EVOLUTION LINE Operating Manual

Cleaning and maintenance

8.3.12 Long-moulding belt

Configuration of the line module long-moulding belt in the line is displayed in chapter
"5 Overview of the line ".

8.3.12.1 Cleaning the top belt


Carry out the preparations (see section "8.3.1 Preparations").

8.3.12.2 Tensioning the top belt


Carry out the preparations (see section "8.3.1 Preparations").
Emil Kemper GmbH
Use a plastic scraper and a clean cloth to clean
the belt (1).
Check the belt tension.
Turn the hexagon nut (1) in the direction of the
arrow (2) to tension the belt.
Tension the belt equally on both sides.
EVOLUTION LINE roll machine
171