Symbols Used On The Line; Safety Information - Kemper EVOLUTION LINE Operating Manual

The following conventions are also used:
Text following this mark represents an item in a list.
–

Text following this mark describes actions to be performed in the specified order.
' ' Text in single quotation marks indicates screens on the touch panel.
" " Text in double quotation marks refers to other chapters or sections in this document.
O Text in small capitals indicates an operator control pushbutton/switch or a button /
N
input box on the touch panel.

1.2 Symbols used on the line

1.3 Safety information

Before working with the line you must carefully read the safety information below and
then follow it. It is intended to protect you, averting hazards and/or injuries.
2
Hazard!
This symbol indicates a particular hazard to health from the line and ways
of averting it.
Warning – electrical hazard!
This symbol indicates an electrical hazard.
Work on electrical equipment should only be carried out by qualified and
authorized electrical specialists.
Warning – electrical hazard!
This symbol indicates an electrical hazard.
EVOLUTION LINE roll machine
Introduction
Emil Kemper GmbH