Kemper EVOLUTION LINE Operating Manual page 140


Touch the input box S
extending table.

Touch the input box R
located on the wooden board/baking tray.

Touch the input box C
reciprocating belt between the placement images in pulses.

Touch the input box C
millimetres per piece if the calculated placement control speed needs to be adjusted.

Under S
The respective step length is listed for each tray (wooden trays/baking trays) below the
S
TEP LENGTH

Enter a new step length in millimetres if you want to change the step length of the
respective tray (wooden trays/baking trays).
Press the
'Reciprocating belt menu' appears:
1
2
132
HAPED SIZE
(
OWS LONGITUDINAL
ORRECTION STEP
ORRECTION PLACEMENT
[ ] (8), touch an input box of your choice.
TEP LENGTH MM
[ ] input box.
MM
button to access another sub-menu. A continuation of the
10:59:59
00000 pcs/h
'Reciprocating belt menu'
Reciprocating belt speed
Working position
Basic position
Start Stop
EVOLUTION LINE roll machine
(4) and enter the shaped size located on the
) (5) and enter the rows of pieces of dough
(6) and enter the start time for the step of the
(7) and enter a correction value in
Depositing
Table removal
Hz
Hz
Control
Mould transport
Start
Mould transport
Operation
Line 000
Head machine
000
On
Start
Emil Kemper GmbH
3
4
5