Discharge Belt 1; Cleaning The Belt; Tensioning The Belt - Kemper EVOLUTION LINE Operating Manual

Cleaning and maintenance

8.3.4 Discharge belt 1

Configuration of the line module Discharge belt 1 in the line is displayed in section
"5 Overview of the line".

8.3.4.1 Cleaning the belt


Carry out the preparations (see section "8.3.1 Preparations").

8.3.4.2 Tensioning the belt


Carry out the preparations (see section "8.3.1 Preparations").
Emil Kemper GmbH
Use a plastic scraper and a clean cloth to clean
the belt (1).
Check the belt tension.
Turn the hexagon nut (1) in the direction of the
arrow (2) to tension the belt.
Tension the belt equally on both sides.
EVOLUTION LINE roll machine
157