8.3.16.4 Tensioning the conveyor belt
Carry out the preparations (see section "8.3.1 Preparations").
Reinsert the panel.
182
Note!
This setting influences the tension of the conveyor belt chains.
If necessary, also tension the conveyor belt chains (see next page).
EVOLUTION LINE roll machine
Remove the panel (1) by unscrewing the
fastening screw.
Check the correct tension of the conveyor
belt (1).
If necessary, adjust the hexagon nut (2) at the
belt tensioner to tension the conveyor belt (1).
Tension the conveyor belt equally on both
sides.
Cleaning and maintenance
Emil Kemper GmbH
Need help?
Do you have a question about the EVOLUTION LINE and is the answer not in the manual?