Setting The Heating, Convection, Sterilization And Drying; Setting A Recipe At The Basic Module - Kemper EVOLUTION LINE Operating Manual

Operation

7.3.1.2 Setting the heating, convection, sterilization and drying

The settings of the air conditioning of the basic module are adjusted via the touch panel.
Password required (see section "6.17.3 Start screen").

7.3.1.3 Setting a recipe at the basic module

This section describes all the necessary working steps to carry out changes to your
recipes at the basic module.

Switch the line on (see section "7.1 Switching the line on and off").

Switch the control voltage on (see section "7.2 Switching the control voltage on").

Open the desired recipe (see section "7.5 Selecting a recipe via the touch panel").
After a few seconds, the start screen appears with illustrations of the line's assemblies on
the touch screen:
Emil Kemper GmbH
Note!
Password-protected menus should only be accessed by experienced
persons or after consultation with competent employees at
Emil Kemper GmbH.
Note!
The touch control contains recipes which have been set by Emil Kemper
GmbH according to your wishes.
EVOLUTION LINE roll machine
97