Toshiba e-STUDIO556 Service Manual page 1360

05/08 Mode Element Sub
element
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Custom For dealer
Mode counter
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
08 Setting Counter Counter of
Mode Paper feed
e-STUDIO557/657/757/857
Item Subitem Code Sub-
Weighting/Print 6089
6090
6091
6110
6111
6112
6113
6114
6115
6116
6117
Details Default Acceptable
code value value
1 Black/Large 100 0-9999
Truncation after 0
decimal point of
custom counter value
Output of annotation 1
for custom counter
1st drawer 0 8 digits
2nd drawer 0 8 digits
Bypass feed 0 8 digits
T-LCF 0 8 digits
3rd drawer 0 8 digits
4th drawer 0 8 digits
ADU 0 8 digits
RADF 0 8 digits
75
RAM Contents
SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
0-1 SYS Sets the display method of custom counter value of
total counter.
When the value is displayed as integer, the total
counter value (total value of each color) is sum of the
truncated custom counter value of each color. Note that
the value is slightly decreases compared to display with
decimal point.
0: Displays 2 decimal places.
1: Displays integer (Truncation after decimal point)
0-1 SYS Sets whether the annotation "Custom Counter is result
of..." for custom counter of total counter is output or not.
0: Annotation is not output
1: Annotation is output
M Counts the number of sheets fed from 1st drawer.
M Counts the number of sheets fed from 2nd drawer.
M Counts the number of sheets fed from bypass feed.
M Counts the number of sheets fed from Tandem LCF.
M Counts the number of sheets fed from 3rd drawer.
M Counts the number of sheets fed from 4th drawer.
M Counts the number of output pages of duplex printing.
SYS Counts the number of originals fed from RADF.
Proce Servic
dure e UI
4 Yes
1 Yes
1 Yes
2 Yes
2 Yes
2 Yes
2 Yes
2 Yes
2 Yes
2 Yes
2 Yes