To Add Two Mpb96 Boards And Two T1 Pci Cards; Upgrading To High Capacity - Nortel 1002rp Maintenance And Diagnostics

Upgrading to High Capacity

Upgrading to High Capacity
Choose one of the following upgrade procedures based on your switch
connectivity.
ATTENTION
.
Upgrading to High Capacity: T1 switch connectivity

To add two MPB96 boards and two T1 PCI cards

1 Courtesy stop all CallPilot channels.
2 Power down the server and all peripheral devices.
3 Disconnect the following cables:
a. power cable
b. peripheral device cable
c. D/480JCT-2T1 cables
178
You must use one of the valid configurations and
respect the slot map or the system behavior will be
erratic.
CAUTION
Risk of electrical damage
Wear an antistatic ESD wrist strap when handling cards or
boards, or when working inside the server.
Do not touch the components or gold-edge connectors of
cards or boards.
Place the cards and boards on an antistatic surface until you
are ready to install them.
Standard 1.11
CallPilot