Iq7 Deletion Rap; Iq8 Skew/Misregistration Rap - Xerox WorkCentre 5020 Service Documentation

IQ7 Deletion RAP

Part of the image is missing.
Procedure
Check the paper type. The paper used is within specifications.
Y N
Use paper that is within specifications.
Use paper from a freshly opened packet. The problem recurs.
Y N
Completed
Remove the Drum Cartridge (PL 4.1) (REP 4.1.1) and reinstall it properly. Turn the power OFF
then ON and make a print. The problem recurs.
Y N
Completed
Install a new Drum Cartridge (PL 4.1) (REP 4.1.1). Turn the power OFF then ON and make a
print. The problem recurs.
Y N
Completed
Check the Transfer Corotron (PL 4.3) (REP 4.3.1). The Transfer Corotron is not damaged.
Y N
Replace the Transfer Corotron (PL 4.3) (REP 4.3.1).
Replace the AIOC PWB (PL 8.1) (REP 8.1.1).
Image Quality
IQ7, IQ8

IQ8 Skew/Misregistration RAP

Printed images are not parallel to the edges of the paper.
Procedure
Check the location where the machine is installed. The machine is installed on a stable,
level surface.
Y N
Install the machine on a stable, level surface.
Remove the Drum Cartridge (PL 4.1) (REP 4.1.1) and reinstall it properly. Turn the power OFF
then ON and make a print. The problem recurs.
Y N
Completed
Check the Paper Cassette. The Paper Cassette is installed properly.
Y N
Install it properly.
Check the paper transport path. There are no obstructions or damaged parts in the paper
transport path.
Y N
Remove any obstructions. Reshape or replace any damaged parts.
Replace the AIOC PWB (PL 8.1) (REP 8.1.1).
July, 2007
3-6
Initial Issue
WorkCentre 5020