Workcentre 6605 Error Code List - Xerox Phaser 6600 Service Manual

Error Troubleshooting
Phaser 6600 Error Code List
Chain Link Error
071 921 Waiting for
dashdashSetdas
072 921
hdash key to be
075 921
pressed after
setting side 2 for
manual duplex
print(Tray)

WorkCentre 6605 Error Code List

WorkCentre 6605 Error Code List
Chain Link Error
004 310 IOT Feeder I/F
Failure
005 110 PICKUP JAM
005 121 ADF JAM
005 124 Virtual JAM
005 301 ADF Cover Open
2-112 Phaser 6600 and WorkCentre 6605
Service Manual
Error Details
Tray
Tray 1 : 071
Tray 2 : 072
Manual Feed : 075
Error Details
IOT-FEEDER
communication error
Detect PICKUPJAM
Detect ADFJAM
Detect HARFJAM
ADF cover open
Control Panel Messages
Press Ok Button
to continue
Control Panel Messages
Optional Feeder Error 004-310
Reseat Optional Feeder.
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Paper Jam
Open the Document Feeder Cover
and remove paper.
<After Jam recovery>
Reload the original that was
removed from the Document
Feeder and press the Start button.
N Scanned
Paper Jam
Open the Document Feeder Cover
and remove paper.
<After Jam recovery>
Reload the original that was
removed from the Document
Feeder and press the Start button.
N Scanned
Document Feeder Jam
Job Canceled.
Open Document Feeder Cover
and Remove Jammed Paper.
Document Feeder Cover Open
Close Document Feeder Cover.
FIP location
-
FIP
location
Page 2-178
Page 2-208
Page 2-208
Page 2-208
Page 2-209
Xerox Internal Use Only