Xerox Phaser 6600 Service Manual page 248

Error Troubleshooting
WorkCentre 6605 Error Code List
Chain Link Error
035 779 FAX FWD
document
change error
035 781
035 792 JM Not Detection JM undetected
035 793 Digital Line
Detection
041 340 IOT NVRAM Error Detect NVRAM Error
041 347 IOT I/F Failure
2-152 Phaser 6600 and WorkCentre 6605
Service Manual
Error Details
FAX forward document
change error
Detect busy tone after
dialing.
Connected to digital line
and cannot connect.
(Detect when connecting
to line)
MCU Internal Error(I/F
part)
Control Panel Messages
Fax Communication Error 035-
779
Fax forward document error
Job canceled.
* Caution screen with [Close]
button
Target Fax Busy 035-781
Busy tone detected
Job canceled.
* Caution screen with [Close]
button
Fax Communication Error 035-
792
Joint Menu signal not Detected
Job canceled.
Please try again.
* Caution screen with [Close]
button
Fax Communication Error 035-
793
Digital line detected, an anolog
line is required
Job canceled. Please confirm fax
line is Anolog and not Digital. If
error persists, contact phone
provider.
* Caution screen with [Close]
button
Engine NVRAM Error 041-340
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
Code:xxxxxxxxh
Engine Controller Error 041-347
Power Off/On the Printer.
If this failure occurs again, please
contact customer support.
FIP
location
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Page 2-178
Replace the
MCU Board.
Xerox Internal Use Only