Xerox Phaser 6600 Service Manual page 346

Image Quality
Auger mark
1 Replace the Imaging Units.
Does this solve your problem?
Wrinkled/Stained paper
Wrinkling
1 Verify that the correct print media is being used. If not, use the
print media recommended for the printer.
Does this solve your problem?
2 Check the wrinkle. Is the wrinkle within 30 mm of the four edges of
the envelope?
3-20 Phaser 6600 and WorkCentre 6605
Service Manual
Possible causative parts
• Imaging Unit Y/M/C/K (PL8.1.2/PL8.1.3/PL8.1.4/PL8.1.5)
Action
Possible causative parts
• Transfer Roller (PL14.1.99)
• Fuser Assembly (PL7.1.1)
• Retard Holder Assembly (PL13.3.14)
• Feed Roller Assembly (PL13.2.10)
• Retard Holder Assembly (PL10.3.3)
Action
Yes
The task is
complete.
• TA1 Roller Assembly (PL13.1.2)
• TA2 Roller Assembly (PL13.1.3)
• Regi Chute Assembly (PL15.2.1)
• Exit Roller Assembly (PL17.1.14)
Yes
The task is
complete.
This type of
wrinkle is
considered
normal. Your
printer is not at
fault.
Xerox Internal Use Only
No
Contact Xerox
Technical
Support.
No
If printing on
an envelope,
go to action 2.
If printing on
print media
other than
envelopes, Go
to action 4.
Go to action 3.