Dadf Problems; Fax Problems - Xerox Phaser 6600 Service Manual

Error Troubleshooting

DADF Problems

If document misfeeds or multiple feeds occur in the Duplexing Automatic Document Feeder (DADF),
check and try the following actions.
1. Check whether the DADF roller assembly is installed properly.
2. Ensure the document's paper type meets the specifications for the printer.
3. Check whether the document is properly loaded in the DADF.
4. Ensure that the document guides are adjusted properly.
5. Ensure that the number of document sheets do not exceed the maximum capacity of the DADF.
6. Ensure that the document is not curled.

Fax Problems

If printer does not properly send or receive faxes, check the following:
1. Check your scan glass for marks and clean it.
2. The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak
with the other machine operator and ask her/him to sort out the problem.
3. The FAX mode should be selected.
4. Ensure that there is paper in the paper tray.
5. Check to see if the display shows Memory Full.
6. Ensure that the document is loaded in the DADF or on the document glass.
7. Sending should show up on the display.
8. A noisy phone line can cause line errors.
9. Check your printer by making a copy.
10. The toner cartridge may be empty. Replace the toner cartridge.
11. The fax machine sending you the fax may be faulty.
2-4 Phaser 6600 and WorkCentre 6605
Service Manual
Xerox Internal Use Only