10. Remove the seven screws (silver, 6mm) that attach the MFP Rear IP Board Plate (PL18.1.24) to the
printer and remove the MFP Rear IP Board Plate.
11. Remove the three screws (silver, 6mm) that attach the MFP Top IP Board Plate (PL18.1.19) and
remove the MFP Top IP Board Plate by removing the grounding wire.
Xerox Internal Use Only
Rear
Phaser 6600 and WorkCentre 6605
Service Parts Disassembly
s6600-094
4-139
Service Manual