USB Hub Board
PL19.1.15
Note:
This procedure applies only to the MFP. The USB Hub Board is not present in the SFP.
1.
Remove the Left Cover Assembly. (page 4-136)
2.
Unplug the two connectors from the USB Hub Board .
3.
Remove the three screws (silver, 6mm) that attach the USB Hub Board to the printer and remove
the board.
Xerox Internal Use Only
Service Parts Disassembly
Phaser 6600 and WorkCentre 6605
Service Manual
Front
s6600-149
4-121