Xerox Phaser 6600 Service Manual page 614

Wiring
Symbol
DEVE_A
Connection Wire
CLUTCH ON(L)+24V
Function Logic 1
EXIT SENSED(L)+3.3VDC
Function Logic 2
Connection of Wires
Solenoid/Clutch
M
Motor
Optic Sensor
LED
Safety Interlock Switch
7-22 Phaser 6600 and WorkCentre 6605
Service Manual
Description
Denotes a connection between parts with
harness or wires, attached with signal
name/contents.
Denotes function, and logic value of the
signal to operate the function (Low: L, High:
H). The given voltage is for signal in high
status. The arrow indicates the direction of
signal.
Denotes function, and logic value of the
signal when the function operated (Low: L,
High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes a connection between wires.
Denotes a Clutch or Solenoid.
Denotes a Motor.
Denotes a Photo Sensor.
Denotes an LED.
Denotes a Safety Interlock Switch.
Xerox Internal Use Only