Xerox Phaser 6600 Service Manual page 374

Service Parts Disassembly
3. Release the harness from the LV AC Harness Guide (PL18.1.32).
4. Remove the screw (silver, 6mm) that attaches the LV AC Harness Guide to the printer and remove
the guide.
5. Release the hook of Waste Gear 3 (PL3.1.7) and remove the gear.
6. Release the hook of Waste Gear 2 (PL3.1.3) and remove the gear.
7. Unlock Waste Bearing 1 (PL3.1.4) and rotate the bearing to remove it.
8. Remove the Waste Idler Shaft (PL3.1.5) by pulling it out of the hole on the frame.
9. Remove Waste Bearing 2 (PL3.1.6).
LV AC Harness Guide
Waste Bearing 2
4-22 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
Waste Gear 3
Waste Bearing 1
Waste Gear 2
s6600-108