Operating Environment; Safety / Environment Conditions - Xerox Phaser 6600 Service Manual

General Information

Operating Environment

Characteristic
Installation Temperature /
Humidity
Installation Altitude
Installation Horizontality
Storage Temperature of a
Toner Cartridge

Safety / Environment Conditions

Safety Standard
Laser Safety Standard
EMI
Noise Levels
Mode
Running
Standby
1-70 Phaser 6600 and WorkCentre 6605
Service Manual
Specification
Installation temperature and humidity on the condition without condensation is
as follows.
Operating: 10-32°C, 10-85%RH (No condensation)
Storage: minus 20-40°C, 5-85%RH (No condensation)
0 to 3,100m
Longitudinal levelness of table surface on which the printer is installed: 1 degree
or under
Lateral levelness of table surface on which the printer is installed: 1 degree or
under
The guaranteed period of the Toner Cartridge before unpacked is as follows:
Normal conditions: 24 months under 0 to 35°C, 15 to 80% RH.
Harsh conditions: 1 month under -20 to 0°C and 35 to 40°C, 5 to 15% RH and 80
to 95% RH.
The storage altitude shall be 0 to 3,100m. Can be extended to 0 to 15,000m
when shipped by air.
(Provided that the cargo bay is pressurized to 70.9275Kpa or higher.
100-127V M/C
UL60950-1, CSA 22.2 60950
FDA21CFR Chapter 1, Subchapter J,
Section 1010, 1040
FCC Part15 Subpart B, Class B
Sound Power Level (B)
LWA
Color 7.15
B&W 6.95
Color 4.69
B&W 4.69
220-240V M/C
IEC60950-1 / EN60950-1
IEC60825-1 Amendment 1 + Amendment 2 /
EN60825-1 Amendment 1 + Amendment 2
Class 1 Laser Product
EN55022:2006, Class B
LWAD
7.2
7.25
4.8
4.99
Xerox Internal Use Only