Xerox Phaser 6600 Service Manual page 577

5. Place the removed waste cartridge on a level surface.
CAUTION: To avoid toner spills or malfunction, do not lay the waste cartridge on its side.
6. Remove the cleaning rod from inside the printer.
7. Insert the cleaning rod into one of the four cleaning holes until it clicks, then pull it out. Repeat this
two more times. Repeat this step for the other three colors.
Xerox Internal Use Only
x4
Y Y M M C C
K K
Phaser 6600 and WorkCentre 6605
Service Manual
Maintenance
6-9