Xerox Phaser 6600 Service Manual page 245

WorkCentre 6605 Error Code List
Chain Link Error
035 706 Fall Back Error
035 708 Post Message
Resend Over
035 709 G3 Send RTN/PIN
Receive
035 710 Receive PIN
035 716 T2 Time Out
Xerox Internal Use Only
Error Details
Fall back error.
Post message resend over. Fax Communication Error 035-
In G3 send, receive
RTN/PIN.
PIN receive (excl. EOR)
T2 timeout.
Control Panel Messages
Fax Communication Error 035-
706
Faliure to negotiate fall back.
Job canceled.
Please try again.
* Caution screen with [Close]
button
708
Post message response Error.
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Communication Error 035-
709
Retrain error received
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Communication Error 035-
710
Procedural interrupt negative
received
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Communication Error 035-
716
T2 time out - Timing between
commands exceeded 6 seconds
Job canceled. Please try again.
* Caution screen with [Close]
button
Phaser 6600 and WorkCentre 6605
Error Troubleshooting
FIP
location
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
2-149
Service Manual