Iit (Image Input Terminal) Specifications - Xerox Phaser 6600 Service Manual

ID Print
User name can be printed. The printing position can be selected from upper right, upper left, lower
right and lower left (Only for PCL6). The user selects using the operator panel whether user name is
printed or not and where it is printed.
Non-Genuine Mode
When a Toner Cartridge has reached end-of-life, the printer stops accepting print requests (Toner
Cartridge life is counted by the counter in CRUM). Taking into consideration that some users use refilled
Toner Cartridges they get from remanufacturers, the printer can accept a print request by the user' s
panel operation even if the life of the Toner Cartridge has ended. Settings of Toner Cartridge can be
made separately (settings of Toner Cartridge can not be made by color). When the mode has changed
so that the printer does not stop even after life of Toner Cartridge ends, the printer displays a message
on the operator panel to inform the user of the mode change. When the printer operates in this mode,
print image quality is not guaranteed. Also, remaining toner level is not displayed (as CRUM data can
not be guaranteed).

IIT (Image Input Terminal) Specifications

These specifications apply only to the WorkCentre 6605.
Scanner
Scanning Method Platen: Document-fixed flatbed scanning method
DADF: Carriage-fixed, document-feeding scanning method (2- side scanning)
Optical Resolution 1200 x 1200 dots / 25.4mm (max)
Light Source LED
Maximum Scanning Guarantee Area
Platen: 215.9mm x 297mm
DADF: 215.9mm x 355.6mm
Scanning Halftone Level
Output from the CCD has the following halftone level.
Gray: 16bit x 2ch (CDD/EVEN)
Color: 16bit x 3ch (R/G/B)
Platen
Platen Glass Size: 221mm x 300mm (Flat glass area)
Document Image Area (Platen mode).
Max: 215.9mm (8.5") x 297mm
Xerox Internal Use Only
General Information
Phaser 6600 and WorkCentre 6605
Service Manual
1-79