Xerox Phaser 6600 Service Manual page 365

10. Release the harness from the Video Harness Guide (PL18.1.10).
11. Disconnect plugs P/J171, P/J311, P/J172, P/J312, P/J331, P/J213 from the three drive motors and
the interim connector from the jack inside the the Drive Assembly (PL3.1.1).
12. Release the harnesses from the clamps at the bottom of the Drive Assembly.
13. Remove the four screws (silver, 6mm) that attach the Video Harness Guide to the printer and
remove the guide.
Xerox Internal Use Only
Service Parts Disassembly
P/J171
P/J311
Interim Connector
P/J331
P/J172
P/J312
Phaser 6600 and WorkCentre 6605
Service Manual
s6600-104
4-13