Transfer; Transfer Belt Assembly - Xerox Phaser 6600 Service Manual

Service Parts Disassembly

Transfer

Transfer Belt Assembly

PL6.1.1
Note: Make sure that the belt surface of the Transfer Belt Assembly is never touched.
1. Open the Front Door Assembly (PL19.1.34).
2. Open the Right Side Door (PL19.1.96).
3. Open the Rear Door Assembly (PL19.1.95).
4. Open the Top Cover Assembly (PL19.1.1).
5. Remove the Waste Cartridge. (page 4-50)
6. Lift the Transfer Belt Assembly (PL6.1.1) by the handles on the left and right sides, and then pull it
out to the front.
Front
Note: Keep the Transfer Belt Assembly on a flat workbench free of foreign substances.
4-38 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
s6600-070