Xerox Phaser 6600 Service Manual page 160

Error Troubleshooting
Scan Counter Clear
Item
Counter Clear (FB)
Counter Clear (DADF)
Carriage Drive_100
Carriage Drive_100 is the IIT jig for the ORT which continuously operates the carriage 100 times a test.
If the lump error or the home position error is detected, the display shows the message [Abnormal
End].
Item
Carriage Drive_100
2-64 Phaser 6600 and WorkCentre 6605
Service Manual
Sensor Status
Clears the value of the FB scan counter.
Clears the value of the DADF scan counter.
Display After Diag
Normal
Complete
Error
Abnormal End
Xerox Internal Use Only