Xerox Phaser 6600 Service Manual page 455

7. Unplug all connectors from the IP Board.
8. Remove the eleven screws (silver, 6mm) that attach the IP Board to the printer (ten from the
board, one from the USB port at the rear) and remove the board.
Rear
Replacement Note:
Xerox Internal Use Only
Make sure the top edge of the board is under the metal hook at the top.
Service Parts Disassembly
FFC 1502
810
Phaser 6600 and WorkCentre 6605
Service Manual
1501 NVRAM
401
101
102
1302
s6600-142
4-103