Service Parts Disassembly
MFP Control Panel Assembly
PL1.1.1
1.
Remove the Front Door Assembly. (page 4-128)
2.
Remove the Left Cover Assembly. (page 4-136)
3.
Unplug connector P/J 830 from the USB Hub Board (page 4-121), and release the harness from
the harness guide.
4.
Remove the screw that attaches the ground wire to the frame.
5.
Release the hook and lift the Control Panel Hinge Cover off the printer.
4-8
Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
s6600-056
Front