Xerox Phaser 6600 Service Manual page 234

Error Troubleshooting
WorkCentre 6605 Error Code List
Chain Link Error
033 500 FAX RX JPEG Data
Limit Over
033 501
033 502 File Open Error
033 503 Memory Full
033 510
033 511
2-138 Phaser 6600 and WorkCentre 6605
Service Manual
Error Details
In FAX receive, JPEG
encode data volume
exceeds system data
(COLOR_RX_PAGE_LIMIT)
.
Cancel Codec processing
due to error of read part
during manual send.
File open
errorT_RCV_STBY
In receive, memory full.
(under THRESH_MEMRX)
In JBIG data decode, error
in the number of decode
line in one stripe.
Result of MH,HR,MMR
receive decode is 0Line.
Control Panel Messages
Fax Codec Error 033-500
JBIG Compression error. FAX RX
JPEG Data Limit exceeded.
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Codec Error 033-501
Codec processing canceled during
manual send.
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Error 033-502
Unable to open File
Job canceled.
* Caution screen with [Close]
button
Device Memory Full 033-503
Job canceled. Remote device will
try again.
* Caution screen with [Close]
button
Fax Codec Error 033-510
JBIG Compression error. Error in
the number of decode lines.
Job canceled. Please try again.
* Caution screen with [Close]
button
Fax Codec Error 033-511
No lines received for decode
Job canceled. Remote device will
try again.
* Caution screen with [Close]
button
FIP
location
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Replace the
Fax Board.
Xerox Internal Use Only