Laser Unit; Laser Unit Assembly - Xerox Phaser 6600 Service Manual

Service Parts Disassembly

Laser Unit

Laser Unit Assembly

PL2.1.1
1. Remove all the Dispenser Assemblies Y, M, C, K. (page 4-34)
2. Remove the two screws (silver, tapping, 8mm) that attach the Base Duct (PL4.1.2) to the printer
and remove the duct. One screw is at the top, the other at the front.
3. Release the clamp holding the harness to the Laser Unit Assembly.
4. Remove the two screws (silver, 6mm) that attach the Laser Unit Assembly and remove the Laser
Unit Assembly while pulling the harness out of the hole on the frame.
4-10 Phaser 6600 and WorkCentre 6605Xerox Internal Use Only
Service Manual
s6600-058