Xerox Phaser 6600 Service Manual page 304

Error Troubleshooting
Step Check
4 Check after replacing the Black Imaging Unit
Replace the Black Imaging Unit.
Does the error still occur?
005-110 Pickup Jam
005-121 ADF Jam
005-124 Virtual Jam
Step Check
Possible causative parts:
• DADF Assembly (PL51.1.2)
• IIT Pick-up Module Kit (PL51.1.4)
• IP Board (PL18.1.22)
1 Check the document
Does the document meet the specifications of the printer?
2 Check the DADF Assembly
Is the DADF Assembly closed properly against the platen
glass?
3 Check the DADF Assembly connection
Check the connection between the DADF Assembly and the
IP Board.
Is P/J1502 connected securely?
4 Check the document path
Open the DADF cover and check the document path.
Are there any foreign objects, or paper pieces, etc. on the
document path?
5 Check the IIT Pick-up Module Kit
Is the IIT Pick-up Module Kit installed properly?
6 Check the IIT Pick-up Module Kit
Is the IIT Pick-up Module Kit deformed or worn out?
7 Check after replacing the DADF Assembly
Replace the DADF Assembly.
Does the error still occur?
2-208 Phaser 6600 and WorkCentre 6605
Service Manual
Yes No
Replace the MCU
Board.
Yes No
Go to step 2. Use the right
document.
Go to step 3. Close the DADF
Go to step 4. Connect P/J1502
Remove the Go to step 5.
foreign objects,
or paper pieces,
etc.
Go to step 3. Reinstall the IIT
Pick-up Module
Replace the KIT Go to step 7.
IIT Pick-up
Module.
Replace the IP
Board.
Xerox Internal Use Only
Finished.
Assembly
properly.
securely.
Kit.
Finished.